Ammonium bisulfate dryer

Ammonium bisulfate is commonly used as a flux and disinfectant, and is used to make sulphate and sodium alum. It can be used as mineral decomposition flux, acid dye auxiliary agent, sulfate and sodium vanadium production, and also used in toilet cleaner, deodorant and disinfectant. Ammonium bisulfate dryer: ammonium bisulfate dryer is a very effective equipment for drying solid particles. The surface of particles suspended in the air stream is fully exposed to the drying ring

Ammonium bisulfate is commonly used as a flux and disinfectant, and is used to make sulphate and sodium alum. It can be used as mineral decomposition flux, acid dye auxiliary agent, sulfate and sodium vanadium production, and also used in toilet cleaner, deodorant and disinfectant.

  ammonium bisulfate dryer:

   ammonium bisulfate dryer is a very effective equipment for solid particle drying. The surface of particles suspended in the air stream is fully exposed to the dry environment, so as to obtain better heat transfer effect and shorten the drying time. By continuously controlling the drying air at the inlet and outlet and making it fully mixed with solid particles, the same product temperature and uniform drying effect can be achieved.

   features of ammonium bisulfate dryer:

    it is driven by vibration motor, with stable operation, low noise, long service life and convenient maintenance. It has high thermal efficiency and can save energy by more than 30% compared with the general drying device. The bed temperature distribution is uniform, no local overheating phenomenon, uniform fluidization and no dead corner phenomenon. The thickness of the material layer, the moving speed and amplitude in the machine can be adjusted steplessly within the design range, with good adjustability and wide application area. It has little damage to the surface of materials, can be used for drying fragile materials, and can also be used when the particles are irregular, without affecting the effect. The fully enclosed structure can effectively prevent the cross pollution between materials and the outside world. The environment is clean and can be operated continuously. When it is used for mass production of high moisture materials, multiple sets can be connected in series to meet the requirements of users.

Operation and function adjustment of fluidized bed dryer:

   1. Start up procedure

   a adjust the exciting force of vibration motor to make the machine reach the required amplitude;

   B start the induced draft fan;

   C start the air supply fan and pay attention to whether the direction of the air supply and induced draft fan is correct;

   D adjust the parameters to reach the required value and stabilize within a certain range;

  e start the vibration motor. The amplitude shall meet the requirements (full amplitude);

   2. Precautions after starting the machine and before normal operation:

   a pay attention to the operation of the machine when starting. If there is any abnormality, stop the machine immediately for inspection;

   B in case of contact and friction with auxiliary equipment, the machine shall be shut down immediately for adjustment;

   C if the connecting bolt is loose and abnormal sound is generated, the machine should be stopped immediately for inspection and the loose screw should be tightened again.

   D pay attention to the steering direction of the two motors, which should meet the requirements. Under normal working conditions, the dryer should vibrate vertically and horizontally according to the determined amplitude value. It is not allowed to produce Inconsistent amplitude before and after or shake left and right. Otherwise, carefully check whether the exciting force of the vibration motor is the same and whether the counterweight iron is loose;

E amplitude shall meet the requirements (full amplitude);

Fdryer should vibrate vertically and horizontally according to the determined amplitude value under normal working condition. It is not allowed to produce inconsistent amplitude before and after or shake left and right. Otherwise, carefully check whether the exciting force of the vibration motor is the same and whether the counterweight iron is loose;

  g it is normal that the amplitude of the machine is large when starting and stopping, so it is not necessary to adjust it