High tech product inner heating spiral belt conical vacuum dryer

Product details 1. Overview: the inner heating spiral belt conical vacuum dryer is a kind of spiral belt which uses spiral belt to rotate and lift materials, and the heat transfer medium (such as hot water, heat-transfer oil, steam, etc.) is introduced into the conical jacket and hollow spiral belt, so that the heated materials can be lifted from all around and dropped from the middle, and the water vapor can be taken away in time by vacuumizing the cylinder, Make the material dry and mix in a short time

product details

1、 Overview:

The inner heating spiral belt conical vacuum dryer is a kind of spiral belt which uses the spiral belt to rotate and lift the materials, and the heat transfer medium (such as hot water, heat-transfer oil, steam, etc.) is introduced into the conical jacket and hollow spiral belt at the same time, so that the heated materials can be lifted from all around and dropped from the middle, and the water vapor can be taken away in time by vacuumizing the cylinder, The material can be dried and mixed in a short time. Compared with the traditional vertical mixer, there is no transmission mechanism in the cylinder, which fundamentally eliminates the material pollution caused by the leakage of lubricating oil. It runs reliably and stably. It is especially suitable for the mixing of powder and particles with high hygienic requirements. It is also suitable for mixing viscous fluid or viscous or wet materials. Compared with other horizontal dryers, it has the advantages of convenient discharging and can be 100% Complete discharge, easy operation and maintenance. Its drying efficiency is 3-5 times of the same specification "double cone rotary vacuum dryer".



2、 Features of internal heating spiral belt vacuum dryer:

1. The reducer directly drives the agitator to rotate.

2. It can be used in the mixing of powder and powder, powder and liquid, reaction equipment and drying equipment.

3. Spray device and sterile spiral belt vacuum dryer can be added according to the user's requirements, so as to spray appropriate amount of liquid into the material.

4. The rotation speed can be adjusted according to the process requirements. When the speed is low, the drying effect is dominant; when the speed is high, the drying effect is dominant. Its mixing effect is dominant. Therefore, by selecting this equipment, the original two kinds of equipment can be used to achieve the purpose, and now they can be combined into one to save cost.

5. The cylinder can be designed with jacket. When the jacket is filled with a certain temperature medium, it can meet the user's requirements for process temperature control

6. The equipment can be designed to meet the conditions of vacuum or pressure

7. The shredding device and screw belt vacuum dryer can be added to cut any size of aggregate to meet the process requirements.

8. A variety of sealing devices are available: packing seal, mechanical seal and lip seal

9. A variety of discharge valves are available: butterfly valve, ball valve, hemisphere valve and knife gate valve

Model and specification	50	100	200	500	1000	1500	2000	3000	4000	5000
Capacity L	50	100	200	500	1000	1500	2000	3000	4000	5000
^Large inner diameter Ø mm	500	620	800	1100	1350	1550	1700	1950	2150	2300
Power kw	1.5	1.5	2.2	3.7	5.5	5.5	7.5	11	22	22

4、 Internal heating spiral belt vacuum dryer is widely used

Conical mixing vacuum dryer is a multifunctional dryer integrating mixing and vacuum drying. The material is heated and stirred in the tank, and the moisture evaporated by heating is pumped out by the vacuum pump, and the finally dried material is discharged from the outlet at the bottom of the cone. The cone dryer has high drying efficiency, large drying contact surface, fast and thorough discharge of materials, no dead corner, and convenient cleaning. It can replace mixing and drying equipment (such as biconical dryer, rake dryer, biconical mixer and twin screw mixer) to complete the whole process of mixing, drying and unloading in the same equipment. It can also be used for cooling, sterilization, reaction and other operations. It can be widely used in medicine, chemical industry, pesticide, food and other industries. It is a good mixing and drying equipment, which can realize full closed and continuous operation in the whole process.

Changzhou Haomai drying Engineering Co., Ltd. specializes in optimizing and designing all kinds of drying equipment, granulating equipment, mixing equipment, crushing equipment, etc. the company always adheres to the people-oriented business philosophy and takes providing products to customers as its own responsibility. The equipment has mature technology, excellent production, stable performance, guaranteed after-sales service, and detailed equipment technology and price