Tengzhou customer 2800 * 10 layer disc dryer delivery site

Tengzhou customers after a number of drying equipment manufacturers, and finally signed a 2800 * 10 layer disc dryer contract with our company, Haomai drying thank customers for their trust and support, we will also use 100% quality and service to give back to you! At present, the disc dryer has entered the delivery stage.

A new type of disc dryer independently designed and developed by Changzhou Haomai company is fresh out of the furnace. At present, the disc dryer has entered the stage of delivery.

Tengzhou's customers have signed a 2800 * 10 layer disc dryer contract with our company after the investigation of several drying equipment manufacturers. They are very satisfied with our production technology, equipment scheme and experimental results. Haomai drying thanks customers for their trust and support, and we will give back to you with 100% quality and service!

The vacuum disc continuous dryer designed and produced by our company is an efficient and energy-saving continuous drying equipment which is improved and innovated on the basis of absorbing domestic and foreign technologies. Its unique structure and working principle determine that it has high thermal efficiency, low energy consumption, small floor area, simple configuration and convenient operation and control. Good operating environment. It is widely used in chemical industry, medicine, pesticide, feed, new material and other industries.

Working principle of disc dryer:

The disc dryer is composed of hot air system, drying system, tail gas treatment system, solvent recovery system and control system. The wet material is continuously added to the first drying plate on the upper part of the dryer from the feeder, and the rake arm with rake blade makes rotary motion to make the rake blade continuously stir fry the material. The material flows through the surface of the drying pan along the exponential helix, and the material on the small drying plate is transferred to the outer edge, and falls to the outer edge of the lower large drying plate at the outer edge. On the large drying plate, the material moves inward and falls into the next layer of small drying plate from the middle blanking port. Large and small drying plates are arranged alternately from top to bottom, so that materials can continue to flow through the whole dryer. The hollow drying plate is filled with heating medium, which forms saturated steam, hot water and heat conducting oil. The heating medium enters from one end of the drying plate and leads out from the other end. The dried material falls to the bottom layer of the shell from the last layer drying plate, and then is transported to the discharge port by the rake blade. The moisture escapes from the material and is discharged by the dehumidification port on the top cover, and the moisture of the vacuum disc dryer is extracted from the vacuum pump port on the top cover. The dry materials discharged from the bottom layer can be packaged directly.

Innovative design of Haomai disc dryer:

1. Four layers and five layers are equipped with crushing shaft, and each layer is equipped with 6 pieces of grinding device with scraper, which can effectively avoid the dead angle of disk surface.

2. The inner guide plate in each layer of heating plate can provide more effective steam circulation direction.

3. The upper part of the feeding section is in the middle, and the multi-layer tray can effectively distribute the material uniformity and extend the service life of the first layer tray more effectively.

4. The uniform distribution on the door can check the operation condition of each floor and facilitate the maintenance of equipment.

Changzhou Haomai drying Engineering Co., Ltd. mainly produces new disc dryer, ^ new design and manufacturing process, ^ equipment quality, perfect after-sales service system, Haomai brand drying equipment is your wise choice!

Shandong Tengzhou customer disc dryer delivery site: