Aluminum 2-ethylhexanoate dryer aluminum isooctanoate flash dryer

The special dryer for aluminum 2-ethylhexanoate recommended by Haomai drying Co., Ltd. is a drying equipment combining fluidization drying with air drying. It can directly dry filter cake like, mud like and sticky paste materials with good drying effect and stable product quality.

Aluminum 2-ethylhexanoate dryer - flash dryer

2- ethyl hexanoate is also known as 21 (2- ethyl hexanoic acid) hydroxyl aluminum, also known as aluminum isooctanoate. It is widely used in the field of flavors and fragrances, such as the formation of transparent frozen elastomers or paste in D- limonene. It is also an indispensable raw material in the production of cosmetics and inks. The latter process of aluminum 2-ethylhexanoate production needs drying. The traditional drying equipment is the hot air circulation oven. However, due to its low drying efficiency, high energy consumption and unstable product quality, it is gradually replaced by rotary biological dryer which integrates drying, crushing and grading.

The special dryer for aluminum 2-ethylhexanoate recommended by Haomai drying Co., Ltd. is a drying equipment combining fluidization drying with air drying. It can directly dry filter cake like, mud like and sticky paste materials with good drying effect and stable product quality. At present, the equipment has been put into production in many domestic enterprises, bringing good economic benefits and equipment benefits for enterprises, with superior performance. Aluminum 2-ethylhexanoate dryer is praised by customers for its small volume, large output, low environmental pollution, adjustable moisture content and particles.

Production process of aluminum 2-ethylhexanoate

The filter cake with a moisture content of about 45% enters the flash main engine from the screw feeder at a certain speed, and is blown up by the hot air flow after being broken by the agitating blades and high-speed hot air flow. A relatively stable fluidized bed is formed in the drying chamber. The material and hot air are fully contacted to heat transfer. The dried material rises with the air flow and receives the effect of centrifugal force Continue drying until it meets the requirements, and then it is discharged from the drying chamber through the concentrator and collected by the cyclone separator. The tail gas with a small amount of powder enters the pulse bag filter for collection, and the waste gas is discharged through the tail gas induced fan.

Process parameters of aluminum 2-ethylhexanoate dryer

Blast capacity: 2500-2600m 3 / h

Engine speed: 1400R / min

Feeding speed: 120-160kg / h

Inlet air temperature: 150-160 ℃

Exhaust temperature: 65-80 ℃

Induced air volume: 3300-3400 m3 / h

Advantages of aluminum 2-ethylhexanoate flash dryer

1. Due to the reduction of crushing process, flash drying avoids the material loading required by traditional oven drying. Unloading and other links, put an end to the coking discoloration and other product deterioration instability, improve product yield, greatly reduce the loss of enterprises.

2. Flash dryer basically completes the whole process of crushing and drying in a closed space, which simplifies the production process, improves the production capacity, and can work continuously to avoid the possibility of impurities being brought into the product. The equipment is equipped with pulse dust collector, which reduces environmental pollution and greatly improves the working environment of the workshop.