Complete equipment for granulation and drying of silicon sludge

Our company designed a complete set of silicon sludge granulation and drying equipment for customers, which is environmental protection and airtight, energy saving, mature technology and safe operation.

Diatom mud is mainly composed of pure natural inorganic materials without any pollution and odor. Diatom mud has many characteristics and functions, such as natural environmental protection, manual technology, humidity regulation, air purification, fire prevention and flame retardant, sound absorption and noise reduction, heat preservation and heat insulation, protection of eyesight, self-cleaning of wall surface, and long service life, which is incomparable to traditional decorative materials such as latex paint and wallpaper.

Our company designed a complete set of silicon sludge granulation and drying equipment for customers, which is environmental protection and airtight, energy saving, mature technology and safe operation. The moisture content of silicon mud packed in ton bags of raw materials is about 55% - 60%, and the moisture content of materials after pre drying is about 35-40%, which meets the feeding requirements of granulator. The final product of Zui is about L = 20 mm, Φ = 10 mm, the output is 10-13 tons / day, and the water content is less than 1%;

Characteristics of silicon sludge granulation and drying complete equipment project

(1) the design embodies the four principles of "environmental protection and airtight, energy saving, mature technology and safe operation", and carries out process layout and equipment selection, so as to make the production technology and equipment and main economic indicators reach the pre Jin level of domestic similar projects, and Zui greatly reduces the project investment.

(2) fully consider the characteristics of fine dust and large dust in the drying and granulation process of silicon mud, and adopt the combined dust removal of cyclone dust removal + foam dust removal + pipe dust removal + powder recovery and scattered point dust removal, so as to achieve no smoke and dust emission in the whole production process and meet the national atmospheric emission concentration of ≤ 30 mg / m3.

(3) fully considering the characteristics of silica sludge easy to oxidize and ignite in the drying process, the paddle dryer equipped with high-pressure water gun is used to remove the dead corner layer regularly, the belt dryer adopts frequency conversion explosion-proof motor, and increases the inspection window;

(4) fully consider the reasonable matching of the import and export materials of the complete set of equipment, fully consider the quality control points of the dryer seal, mesh belt life, etc., and apply the advanced technology of German GEA Nilu company, Japan dachuanyuan, Danmai anhedano and other manufacturers introduced and absorbed by our company in the project.

Haomai drying is a professional drying equipment supplier integrating R & D, manufacturing, sales and construction. Welcome to consult and discuss.