Haomai and jinni company hand in hand again, signing 3 sets of automatic rail tipper

After more than two months of discussion and communication, jinni company and our company once again joined hands and successfully signed the contract for 3 sets of automatic rail type tipper. Jinni customer is an old customer of our company. Before that, we ordered many sets of boiling drying unit, mixer and other equipment from our company. The customer feedback that the use effect is very good, so this new project first considered our company. Our company's technical personnel according to the customer request, the introduction country

After more than two months of discussion and communication, jinni company and our company once again joined hands and successfully signed the contract for 3 sets of automatic rail type tipper.

Jinni customer is an old customer of our company. Before that, we ordered many sets of boiling drying unit, mixer and other equipment from our company. The customer feedback that the use effect is very good, so this new project first considered our company. According to the customer's requirements, our company's technical personnel introduced advanced technology of domestic and foreign overturning machines, combined with many years of practical experience, customized a set of new automatic rail type overturning and throwing machine for customers. Jinni company was very satisfied with the scheme and design proposed by our company, and finally signed a contract with our company. It includes two 2m tippers and one 5m tipper.

Track type dumper, also known as tipper, can be used for the fermentation and composting of organic wastes such as livestock manure, sludge waste, sugar mill filter mud, dregs cake and straw sawdust. It is widely used in organic fertilizer plants, compound fertilizer plants, sludge waste plants, horticultural fields and Agaricus bisporus planting fields.

Turnover includes walking fermentation tank body, walking track, power taking device, overturning and turning part and rotating tank device. The advanced roller drive is used in the part of turning, throwing and stacking, which can be lifted or not. The lifting type is mainly used in the working condition that the width of the tank body is not more than 5 meters, and the turning depth is not more than 1.3 meters.. The bearing seat of the tipping device is fixedly connected to the tipping frame, and the two main shafts are fixedly connected to the bearing pedestal. On each spindle, there are several tipping shafts arranged at a certain distance and staggered at a certain angle, and each turning shaft is welded with a turning plate. The tipping device is connected with the walking device through a pin shaft. The bearing seat of the walking device is fixedly connected to the walking frame, the two connecting shafts I equipped with the walking wheel are fixedly connected in the bearing seat, one end of each connecting shaft I is connected with one end of the connecting shaft II through the coupling, and the two output shafts of the reducer II are respectively connected with the other end of the two connecting shafts II through the coupling. The electric hoist of the lifting device is fixed on the walking frame, one end of the steel wire rope is wound on the electric hoist, and the other end is fixed on the turning frame.

The main features of the rail tipper are as follows:

1. It is suitable for aerobic fermentation, and can be used with solar energy fermentation chamber, fermentation tank and mobile machine. The function of one machine with multiple slots can be realized by matching with the mobile machine.

2. The matching fermentation tank can not only discharge materials continuously but also batch. High efficiency, stable operation, strong and durable, even flip.

3. Centralized control of control cabinet can realize manual or automatic control function.

4. Equipped with soft starter, the impact load is low when starting.

5. It is equipped with lifting system.

6. The tooth extraction is firm and durable, and has certain crushing and mixing ability to materials.

7. Limit travel switch, which plays the role of limit and safety.

Sludge pump flow meter of track type tipper

5m tipper

Length, width and cushion height of degradation tank

50m-5m-1.5m

The area of bedding material in degradation tank the volume of bedding material in degradation tank is the amount of sewage treated by unit bedding material

250 square meters 375 cubic meters 1 ton per 60 cubic meters of bedding material

Each degradation tank can treat 6.25 tons of manure

The speed of the track type tipper is about 50 meters per hour, that is to say, one degradation tank with a length of 50 meters and a width of 5 meters can be completed per hour

Sludge pump flow rate: spraying 6.25 tons of manure per hour

A kind of

2m tipper

Length, width and cushion height of degradation tank

50m-2m-1.2m

The area of bedding material in degradation tank the volume of bedding material in degradation tank is the amount of sewage treated by unit bedding material

100 square meters 120 cubic meters 1 ton per 60 cubic meters of bedding material

Each degradation tank can treat 2 tons of manure

The speed of the track type tipper is about 50 meters per hour, that is to say, one degradation tank with a length of 50 meters and a width of 2 meters is completed per hour

The flow rate of sludge pump is 2 tons of feces per hour