Application characteristics of sludge dryer

The application characteristics of sludge dryer are as follows: (1) short residence time of materials and high heat exchange rate, which can realize instant drying; (2) special cyclone separator recovery device ensures small loss of dry starch; (3) special designed system makes starch not easy to agglomerate and can control residual moisture; (4) new type ventilation screw replaces traditional closed pneumatic screw, which has good effect and low failure rate; (5) special cyclone separator is used to recover dry starch ）No large number of moving parts, running

Application characteristics of sludge dryer

(1) Short residence time, high heat exchange rate and instant drying can be realized;

(2) Special cyclone separator recovery device ensures small loss of dry starch;

(3) Special designed system makes starch not easy to agglomerate and can control residual moisture;

(4) The new type of ventilation screw replaces the traditional closed pneumatic screw, which has good effect and low failure rate;

(5) There is no large number of moving parts and the cost of operation and maintenance is low.

Characteristics of sludge dryer

1. The energy consumption of sludge paddle dryer is low: due to indirect heating, there is no large amount of air to take away heat, and the outer wall of the dryer is provided with insulation layer. For slurry materials, only 1.2kg water vapor is needed to evaporate 1kg water.

2. The cost of sludge paddle dryer system is low: the unit effective volume has a huge heat transfer surface, which shortens the processing time and reduces the equipment size. It greatly reduces the building area and building space.

3. A wide range of processing materials: using different thermal media, it can handle both heat sensitive materials and materials requiring high temperature treatment. Common media are: steam, heat transfer oil, hot water, cooling water, etc. It can be operated continuously or intermittently, and can be used in many fields.

4. Small environmental pollution: do not use carrying air, dust material entrainment is small. The evaporation of solvent is very small, which is easy to handle. Closed circuit circulation can be used for contaminated materials or solvent recovery.