Heroic drying introduces you to egg yolk high speed centrifugal spray dryer.
Heroic drying introduces you to egg yolk high speed centrifugal spray dryer.1. High speed centrifugal spray dryer for yolk, technical parameters of LPG-100 equipment
Name of feed solution: egg yolk
Initial water content: 53%
Final water content: < 5%
Material can withstand high temperature: 180 ° C
Outlet air temperature: 75-80 ° C
LPG-100 spray drying machine set
Tower diameter / height: 3.8m/9.5m
Heat source mode: jrq-13 indirect gas stove
Natural gas consumption: 20m3 / h
Power: transmission 18kw
Electric heating 240kw
The equipment covers an area of (length × width × height) M: 10x10x12.5
Two, egg yolk high speed centrifugal spray dryer LPG-100 mechanism performance description
1. Feeding system
screw pump adopts frequency conversion speed regulation to effectively control feed quantity. The main parts of pipeline valve are SUS304 stainless steel in contact with material.
2. Medium circulation system
it is composed of forced draft fan, induced draft fan, air regulating butterfly valve, air duct, etc.
3. Air heating and purification system
it is composed of primary, middle efficiency, high efficiency air filter, fan, steam heat exchanger, electric heating, etc.
4. Drying tower system
it is composed of main drying tower, hot air distributor, atomizer, observation manhole, lighting device inside the tower, pneumatic hammer and other systems.
This system is the core system.
1. Combined with the experimental experience, in the design process of the main tower, we adjusted the taper of the tower cone from the conventional angle of 60 ° to 54 ° and fully considered the smoothness of materials in the cone blanking.
2. The frequency converter is used to adjust the speed of atomizer to achieve better atomization effect. The speed of the main shaft is increased to 11000-18000r.p.m. through the gearbox, which makes the linear speed of atomization disk as high as 130m / s to ensure the atomization effect.
3. The pneumatic percussion hammer adopts the new product with polytetrafluoroethylene head made by Japanese fresh technology, which can not only ensure the vibration effect, but also reduce the noise of the product when knocking, and achieve reasonable distribution.
4. Several sets of lighting devices, observation and cleaning door and manhole were designed.
5. Other auxiliary systems
.6. Control system
In this system, the color touch screen animation shows the technological process, controls the setting of relevant parameters, PLC can be programmed to preset the process flow, and uses fuzzy technology to automatically track the control variable parameters to achieve good results.