LPG-300 spray dryer for vegetable protein

Material name: vegetable protein; water evaporation: 300kgH2O/h; inlet air temperature: 150 C exhaust temperature: 80 C; feeding mode: first stage cyclone separator, dedusting way: two stage cyclone separator; selection equipment: LPG-300 spray dryer.

Material name: plant protein

Water evaporation capacity: 300kgh2o / h

Inlet air temperature: 150 ℃

Exhaust temperature: 80 ℃

Material collection mode: primary cyclone separator

Dedusting method: two stage cyclone separator

Selection equipment: LPG-300 spray dryer.

Feed system:

After filtration, the material is sent to the atomizer for atomization through screw pump and feed pipe. All materials in contact with materials are SUS304.

1. Conveying pipeline: Material: SUS304; thickness: 2mm. Feed pipe, made of stainless steel, including necessary valves and pipe fittings.

2. Feed pump: structural form: single screw pump, frequency control;

Atomization system:

Material: stainless steel atomizing disk

Power: 7.5kW, motor frequency control

Diameter of atomizing disk: 180mm

Atomization disk hole: rectangular hole

Spray drying tower system:

The atomized slurry is heat exchanged with heating gas to complete the drying of slurry. The hot air inlet is equipped with an air distributor.

1. Drying tower: diameter: Φ 5100 mm, height of straight cylinder: 6100 mm, net height of main tower: 10510 mm

Material: the inner wall material is 2.5mmsus304, the insulation is 75mm rock wool, the outer seal is 1mm carbon steel, the tower and pipeline insulation outer wall are fully welded, polished and matted, the drying tower cylinder and the steel structure reinforcing ring bear the load, the bearing ring thickness is 20mm, the material is carbon steel, the tower body reinforcement rib is angle iron, the material is carbon steel.

2. Hot air distributor: Material: SUS304, thickness: 3mm, with uniform air inlet

Electrical control system: it is set on the control panel and controls the whole equipment system in real time through buttons and instruments. It includes parameter display of equipment, which is used to monitor motor, valve, control element, alarm and data record