Recommended jacketed lithium iron phosphate dryer
Haomai drying recommends jacketed lithium iron phosphate dryer to you1. Two heat transfer oil tanks are needed, one is cold and the other is hot, which is easy to cool down quickly
2. The heating temperature of heat transfer oil should be considered. The thermal resistance should be 0-150 ℃, and the heat transfer oil should be heated to 180 ℃
3. The rotary vacuum should also play a role in mixing materials evenly while removing moisture. Therefore, the guide plate should be welded in the rotary vacuum equipment to fully mix the materials
4. The accessories are not detailed enough, and there is no specific model parameter, such as the processing capacity of vacuum pump, which needs to be refined
5. The particle size of our material is between 0.5 and 10um, and the filtering area and precision of the filter bag should be discussed with the engineer
6. After considering two heat transfer oil tanks, it is necessary to calculate the heat exchange area and rate of heat transfer oil tank cooler!
The lithium iron phosphate dryer recommended by Haomai drying Co., Ltd. is a new type of jacketed vacuum drying equipment integrating mixing and drying. The condenser, vacuum pump and dryer are matched to form a vacuum drying device. This machine is advanced in design, simple in structure, easy to clean, and easy to discharge all materials. It can reduce labor intensity and improve working environment. At the same time, because the material also rotates when the container rotates, but there is no accumulation on the wall of the container, so the heat transfer coefficient is high and the drying rate is large, which not only saves energy, but also dries the materials evenly and sufficiently with good quality. It can be widely used in new material industry.