Baozhong Baoda and Haomai drying Co., Ltd. signed hg1.0x8 lithium rotary drying line

This time, our company's design scheme for Baozhong Baoda pharmaceutical factory was favored by the company, and successfully reached a cooperation, ordering a set of hg1.0x8 rotary kiln for lithium hydroxide drying.

Haomai signs hg1.0x8 lithium rotary drying line

This time, our company's design scheme for Baozhong Baoda pharmaceutical factory has been favored by the company and successfully reached cooperation. Jiangsu Baozhong Baoda Pharmaceutical Co., Ltd. is a new comprehensive API factory invested by Hong Kong Ruihua Pharmaceutical International Co., Ltd. in China. The company is mainly engaged in the R & D, production and sales of pharmaceutical, veterinary drugs, pesticides and other fine chemicals.

Hg1.0x8 rotary kiln ordered by Jiangsu Baozhong Baoda Pharmaceutical Co., Ltd. is used for drying lithium hydroxide, which is commonly used as developing agent and lubricating oil for spectral analysis. The capacity of alkaline battery can be increased by 12% ～ 15% and the service life can be increased by 2 ～ 3 times. It is used for lithium salt and lithium base grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc.; it is used in petroleum, chemical, light industry and nuclear industry. When used in alkaline battery, the aluminum content is not more than 0.06%, and the lead content is not more than 0.01%. It can be used as analytical reagent, photographic developer, and lithium production; it is also used as raw material for preparing lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries.

Haomai drying bid farewell to the traditional disc dryer, using rotary drum dryer to dry lithium hydroxide has high mechanization, higher production capacity, lower functional consumption, strong adaptability to material characteristics, and good uniformity of product drying.

This time, the moisture content of materials evaporated by the lithium hydroxide dryer designed by our company needs to reach 38kg / h, drying from the initial moisture of 5% to 0.5%. After visiting the customer's site, our company recommends using steam as heat source, cyclone separator + water film dust collector, DCS remote control, and operating under negative pressure and counter current. The kiln body is slightly inclined to enhance the material fluidity. In addition, the technical department of our company has designed the suitable temperature of the material in detail, so that the equipment and products can achieve good results.